BELTING: 1/2″ x 1″ x 11 ga. clinched edge, galvanized wire mesh belt.
DRIVE SPROCKETS: 4″ dia. with 1-3/16″ dia. shaft; 8″ dia. with 1-7/16″ dia. shaft.
TAIL SPROCKETS: 4″ dia. sprocket with 1-3/16″ dia. shaft.
END DRIVE: One-direction unit operation.
TAKE-UP: Screw type unit at tail end provides 12″ belt take-up.
BED: 7″ x 1-1/2″ x 10 ga. open type formed channel frame w/ UHMW wear strips.
RETURN ROLLERS: 1.9″ dia. x 16ga. steel, model 196S, adjustable.
FLOOR SUPPORTS: Optional
BELT SPEED: 60 FPM, constant.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
Roach open type wire mesh belt conveyors offer opening in bed to
allow air or various sprays to pass through belt and conveyors to
accommodate numerous spraying or drying applications.\
BELTING: High carbon, stainless
steel, others available. Consult factory.
SPEED: Constant speed 1.5-60
FPM; DC variable speed; AC inverter variable speed. Other
constant or variable speeds available. NOTE: CAPACITY
CHANGES WITH SPEED.
MOTORS: Available through 2
HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports,
knee braces, casters, and polytier supports available. See Conveyor
Magnetic or manual starter; limit switch;