TREAD ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S grooved, 3″ centers.
DRIVE BELT: 3/16″ dia., polyurethane belts. Nominal 15 lbs. per roller drive.
DRIVE SHAFT: 1″ dia. C1018 cold rolled steel shaft. NOTE: Spools in spur section only are keyed to provide positive drive (designed not to slip on drive shaft).
COUPLINGS: Couplings located both ends or one end only. Specify where couplings required.
BED: 7″ x 1-1/2″ x 12 ga. formed steel channel frame. Short side of spur is always 12″ overall length.
FLOOR SUPPORTS: Optional
BEARINGS: Precision, lubricated, ball bearing units with composite housings.
MOTOR DRIVE: Unit is designed to be driven by 796LS.
ROLLER CHAIN: Spur driven via crossover with No. 40 chain.
