BELTS: 1/4″ dia. round polyurethane.
DRIVE WHEELS: 2-1/2″ O.D. x 3/4″ face polyurethane, quantity as required, driven by 1/4″ dia. polyurethane belts.
DRIVE SHAFT: 1-3/16″ dia.
AIR CYLINDER: Double action.
AIR CONTROLS: Single solenoid valve.
FRAME ASSEMBLY: Designed to mount into 196LR, 196CALR and 196LS line shaft driven conveyor.
DIVERSION ANGLE: 30 degree, 45 degree and 90 degree. Guard rails on take-away spur conveyor may be required at various angles.
BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.
RATE: Up to 60 sorts per minute.
SPEED: 60-180 FPM, constant. Other speeds available. Consult factory.
MOTOR DRIVE: 1/2 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 50 lbs. per ft.; maximum unit load not to exceed 150 lbs.
SPEED: Unit speed may be
increased from 120 to 250 FPM,
constant speed (specify).
MOTORS: Available in TEFC,
explosion proof, dirty duty,
115/230/1, 575/3, etc.
SLAVE DRIVEN: Driven by drive
shaft on 196LS line shaft conveyor
or by return direction of belt on belt
driven live roller conveyor.
Consult factory.
ELECTRICAL CONTROLS: Designed
per application. Consult factory.
