+1 (615) 313-8620 Mon - Fri 8:00 am - 5:00 pm CST 106 Park South Court Nashville

Roach 751 Roller Bed Heavy duty Belt Conveyor

BELTING: PVC-120 black.

DRIVE PULLEY: 8″ dia. with 1-7/16″ dia. shaft on 15″-39″ BF; 12″ dia. with 1-15/16″ dia. shaft above 39″ BF; both crowned and fully lagged.

CARRIER ROLLERS: 2-1/2″ dia. x 11 ga. steel, model 251S.

TAIL PULLEY: 4″ dia. with 1-3/16″ dia. shaft on 15″-39″ BF; 6″ dia. with 1-7/16″ dia. shaft above 39″ BF; both crowned.

END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.

SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30′.

TAKE-UP: Screw type unit at tail pulley provides 12″ belt take-up.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

RETURN ROLLERS: 1.9″ dia. x 16 ga. steel, model 196S, adjustable.

BELT SPEED: 35 FPM, constant.

BED: 7″ x 10 ga. channel frame. Bed sections attached with couplings and floor supports.

FLOOR SUPPORTS: Optional

MOTOR DRIVE: 1 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

SAFETY POP-OUT ROLLERS: Standard on both ends, 1.9″ dia x 12 ga. steel roller, model 192S on 15″-39″BF, 1.9″ x 9 ga. steel, model 199S on 45″-57″ BF.

ELECTRICAL CONTROLS: Optional

Categories: ,